Cross Fluted
CF1200MA Cross Fluted Film Fill Media
AccuPac® Cross Fluted Fills improve water distribution by splitting the water stream as it descends through the fill pack. The CF1200 MA
splits the water stream 10 times in a 11.8” (300 mm) vertical path. High thermal performance (high KaV/L) and low pressure drop are
simultaneously achieved through engineered flute/microstructure design and the highest manufacturing standards.
CF1900 Cross Fluted Film Fill Media
AccuPac® Cross Fluted Fills improve water distribution by splitting the water stream as it descends through the fill pack. The CF1900
splits the water stream 8 times in a 12” (305 mm) vertical path. High thermal performance (high KaV/L) and low pressure drop are
simultaneously achieved through engineered flute/microstructure design and the highest manufacturing standards.
CF1900MA Cross Fluted Film Fill Media
AccuPac® Cross Fluted Fills improve water distribution by splitting the water stream as it descends through the fill pack. The CF1900 MA
splits the water stream 8 times in a 12” (305 mm) vertical path. High thermal performance (high KaV/L) and low pressure drop are
simultaneously achieved through engineered flute/microstructure design and the highest manufacturing standards.
CFS3000 Cross Fluted Film Fill Media
AccuPac® Cross Fluted Fills improve water distribution by splitting the water stream as it descends through the fill pack. The CF3000
splits the water stream 5 times in a 12” (305 mm) vertical path. High thermal performance (high KaV/L) and low pressure drop are
simultaneously achieved through engineered flute/microstructure design and the highest manufacturing standards.
XF12560 Cross Fluted Film Fill Media
Brentwood's XF12560/15 is a uniquely designed product for installation in package crossflow towers. This fill has cross corrugated sheets
with a built-in internal slant. The sheets have alternating flute angles of 45° and 15°. This allows the fill to be installed vertically without an
external slant. The XF12560/15 provides for a simple installation that saves space in the tower which means savings for both assembly
and material costs. The XF12560/15 is particularly suited for single flow crossflow towers with fans mounted in a vertical plane.
CF1200MA Cross Fluted Film Fill Media
AccuPac® Cross Fluted Fills improve water distribution by splitting the water stream as it descends through the fill pack. The CF1200 MA
splits the water stream 10 times in a 11.8” (300 mm) vertical path. High thermal performance (high KaV/L) and low pressure drop are
simultaneously achieved through engineered flute/microstructure design and the highest manufacturing standards.
CF1900 Cross Fluted Film Fill Media
AccuPac® Cross Fluted Fills improve water distribution by splitting the water stream as it descends through the fill pack. The CF1900
splits the water stream 8 times in a 12” (305 mm) vertical path. High thermal performance (high KaV/L) and low pressure drop are
simultaneously achieved through engineered flute/microstructure design and the highest manufacturing standards.
CF1900MA Cross Fluted Film Fill Media
AccuPac® Cross Fluted Fills improve water distribution by splitting the water stream as it descends through the fill pack. The CF1900 MA
splits the water stream 8 times in a 12” (305 mm) vertical path. High thermal performance (high KaV/L) and low pressure drop are
simultaneously achieved through engineered flute/microstructure design and the highest manufacturing standards.
CFS3000 Cross Fluted Film Fill Media
AccuPac® Cross Fluted Fills improve water distribution by splitting the water stream as it descends through the fill pack. The CF3000
splits the water stream 5 times in a 12” (305 mm) vertical path. High thermal performance (high KaV/L) and low pressure drop are
simultaneously achieved through engineered flute/microstructure design and the highest manufacturing standards.
XF12560 Cross Fluted Film Fill Media
Brentwood's XF12560/15 is a uniquely designed product for installation in package crossflow towers. This fill has cross corrugated sheets
with a built-in internal slant. The sheets have alternating flute angles of 45° and 15°. This allows the fill to be installed vertically without an
external slant. The XF12560/15 provides for a simple installation that saves space in the tower which means savings for both assembly
and material costs. The XF12560/15 is particularly suited for single flow crossflow towers with fans mounted in a vertical plane.
Offset Vertical
OF21MA Offset Vertical Film Fill Media
AccuPac® Offset Vertical Fill combines the low-fouling characteristics of vertical flow with the enhanced water distribution of our cross-
fluted designs. The OF21MA’s high KaV/L thermal performance and low pressure drop are similar to the CF1900/CF1900MA design, but
with lower potential for fouling.
OF21MA Offset Vertical Film Fill Media
AccuPac® Offset Vertical Fill combines the low-fouling characteristics of vertical flow with the enhanced water distribution of our cross-
fluted designs. The OF21MA’s high KaV/L thermal performance and low pressure drop are similar to the CF1900/CF1900MA design, but
with lower potential for fouling.
Splash Fill
KELLY BAR Splash Fill Media
Kelly Bar Splash Fill Media, a well-known splash fill profile with a proven performance track record, is now precision-manufactured by
Brentwood. Named after Neil Kelly, the man responsible for significant contributions in the field of crossflow wet cooling technology and
publisher of the "Kelly Handbook of Crossflow Cooling Tower Performance", this classic design maximizes practicality and can be oriented
either parallel or perpendicular to airflow and in any standard fill arrangement, depending on thermal requirements.
V BAR Splash Fill Media
Brentwood V Bar Splash Fill Media, field-proven for over 30 years, is a durable, high-performance PVC replacement for wooden splash fills
and OEM Splash Bars.
PI BAR Splash Fill Media
Brentwood Pi Bar Splash Fill Media is designed for extra-dirty water applications where a 2" (51mm) wide bar is desired. The domed top
and sloping legs help shed accumulation of solids while improving the splash effect.
LATH Splash Fill Media
Brentwood Lath Splash Fill Media is a lightweight, strong PVC replacement for wooden lath in crossflow or counterflow cooling towers.
Available UV-stabilized PVC Brentwood Lath is more resistant to weather, chemicals, and biological attack. The
self extinguishing properties of PVC means risk of fire is minimal
The Brentwood Lath Wire Hanging System is available for secure, effective installation of Lath Splash Fill Media.
TurboSplash PAC Splash Fill Media
Brentwood TurboSplash PACs are splash media assemblies with hinged panels that can be installed in horizontal and vertical arrays for
high thermal performance in counterflow and crossflow cooling tower applications. Each unit can be accordion-folded into a compact
bundle for efficient, cost-effective storage and shipping and then unfolded in the tower for easy installation.
KELLY BAR Splash Fill Media
Kelly Bar Splash Fill Media, a well-known splash fill profile with a proven performance track record, is now precision-manufactured by
Brentwood. Named after Neil Kelly, the man responsible for significant contributions in the field of crossflow wet cooling technology and
publisher of the "Kelly Handbook of Crossflow Cooling Tower Performance", this classic design maximizes practicality and can be oriented
either parallel or perpendicular to airflow and in any standard fill arrangement, depending on thermal requirements.
V BAR Splash Fill Media
Brentwood V Bar Splash Fill Media, field-proven for over 30 years, is a durable, high-performance PVC replacement for wooden splash fills
and OEM Splash Bars.
PI BAR Splash Fill Media
Brentwood Pi Bar Splash Fill Media is designed for extra-dirty water applications where a 2" (51mm) wide bar is desired. The domed top
and sloping legs help shed accumulation of solids while improving the splash effect.
LATH Splash Fill Media
Brentwood Lath Splash Fill Media is a lightweight, strong PVC replacement for wooden lath in crossflow or counterflow cooling towers.
Available UV-stabilized PVC Brentwood Lath is more resistant to weather, chemicals, and biological attack. The
self extinguishing properties of PVC means risk of fire is minimal
The Brentwood Lath Wire Hanging System is available for secure, effective installation of Lath Splash Fill Media.
TurboSplash PAC Splash Fill Media
Brentwood TurboSplash PACs are splash media assemblies with hinged panels that can be installed in horizontal and vertical arrays for
high thermal performance in counterflow and crossflow cooling tower applications. Each unit can be accordion-folded into a compact
bundle for efficient, cost-effective storage and shipping and then unfolded in the tower for easy installation.
Herringbone
XF75 Cross Flow Herringbone Film Fill Media
AccuPac® Cross Flow Herringbone Fill uses a “herringbone” surface design engineered to distribute water evenly over the entire fill area
for high thermal performance. Herringbone fills with integrated Inlet Louvers (XF75 IL) and Drift Eliminators (XF75 ID) complete this efficient,
high-performance, crossflow media system.
XF75IL Cross Flow Herringbone Film Fill Media with Integrated Inlet Louver
AccuPac® Cross Flow Herringbone Inlet Louver Fills combine an inlet louver with the high thermal performance of the XF75 herringbone
cross flow fill pack.
XF75ID Cross Flow Herringbone Film Fill Media with Integrated Drift Eliminator
AccuPac® Cross Flow Herringbone Drift Eliminator Fills combine a drift eliminator with the high thermal performance of the XF75
herringbone cross flow fill pack.
XF75 Cross Flow Herringbone Film Fill Media
AccuPac® Cross Flow Herringbone Fill uses a “herringbone” surface design engineered to distribute water evenly over the entire fill area
for high thermal performance. Herringbone fills with integrated Inlet Louvers (XF75 IL) and Drift Eliminators (XF75 ID) complete this efficient,
high-performance, crossflow media system.
XF75IL Cross Flow Herringbone Film Fill Media with Integrated Inlet Louver
AccuPac® Cross Flow Herringbone Inlet Louver Fills combine an inlet louver with the high thermal performance of the XF75 herringbone
cross flow fill pack.
XF75ID Cross Flow Herringbone Film Fill Media with Integrated Drift Eliminator
AccuPac® Cross Flow Herringbone Drift Eliminator Fills combine a drift eliminator with the high thermal performance of the XF75
herringbone cross flow fill pack.
Vertical Flow
VF19 PLUS Vertical Flow Film Fill Media
AccuPac® Vertical Flow Fills feature vertical flow channels with large openings that produce the higher water velocities necessary to
create an anti-fouling environment in the fill. In the VF19 PLUS we’ve added an engineered micro-structure to the flutes to improve water
distribution and thermal mixing.
VF3800 Vertical Flow Film Fill Media
AccuPac® Vertical Flow Fills feature vertical flow channels with large openings that produce the higher water velocities necessary to
create an anti-fouling environment in the fill.
VF19 PLUS Vertical Flow Film Fill Media
AccuPac® Vertical Flow Fills feature vertical flow channels with large openings that produce the higher water velocities necessary to
create an anti-fouling environment in the fill. In the VF19 PLUS we’ve added an engineered micro-structure to the flutes to improve water
distribution and thermal mixing.
VF3800 Vertical Flow Film Fill Media
AccuPac® Vertical Flow Fills feature vertical flow channels with large openings that produce the higher water velocities necessary to
create an anti-fouling environment in the fill.
|
|
|
Splash Fill
Gull Wing Fill Slats
Gull Wing Fill, available in 4-inch or 6-inch widths, is our latest and most efficient fill slat offering. The unique design of the Gull Wing Fill
effectively addresses two key concepts clearly lacking in the majority of competitive fill slats: span and water bypass. Span is assured
with full bearing surface contact between the slat and hanger and a center rib stiffener for increased strength. A unique retainer notch
placed at regular intervals creates a space for the hanger grid while providing a full eighth-inch overhang per side to virtually eliminate water
bypass.
Thermally, the Gull Wing Fill is a superior offering when compared to other splash fill bars currently on the market. In fact, the author of the
MRL Rating Software, a rating program used by the majority of cooling tower companies, states, "Gull Wing Fill installations have never
rated short when using MRL original data and comparing the thermal projections to that of the actual field test results".
Gull Wing Fill, when used in conjunction with Shepherd Fill Slat Hangers, is offered with a 10-year warranty!
V-Bar Splash Fill Slats
Splash bars manufactured of extruded PVC with either carbon black or titanium dioxide as a UV inhibitor. The fill bar shall be 50 mil (+/-
0.005") thickness with a uniform hole punch pattern surface to aid in water break-up. Bars should be supported by wire mesh grids a
minimum of 24" on center along the bar length. Splash fill bar type must have at least five (5) years installation history. The fill material is
in accordance with CTI Bulletin STD-136 (88).
Plastic clips shall be interlocking to secure fill bars to mesh. Clips shall prevent any movement between the bar and the grid. The clips are
to be made of pliable polypropylene and shall not break when bent.
Hanger Grids & Brackets
Time tested Shepherd Fill Slat Hangers deliver longer tower life and virtually eliminate fill support failure. Shepherd Fill Slat Hangers are
precision welded wire with uniform grid size and superior corrosion resistance. Hangers are available in galvanized, PVC coated or
stainless steel mesh. Standard grids in a variety of gauges, straight or racked, are available and in stock. Custom grids may be made to
order. Shepherd's unique 3" steel spiral binders may be used to quick connect length drops. As with our hangers, binders are available
galvanized, PVC coated or stainless steel.
Hanger Brackets, manufactured from high quality, corrosion resistant polypropylene, support Shepherd Fill Slat Hangers making
installation faster, easier and more efficient.
Fill Slats & Retainer Clips
Shepherd produces a complete line of high quality extruded PVC cooling tower fill slats designed for parallel and perpendicular
installations. Rigid and strong, Shepherd Fill Slats are engineered for maximum efficiency with minimum power requirements. Shepherd
Splash Fill Slats are available two configurations, Gull-Wing (4" or 6" widths standard) or V-Bar standard 4" width standard).
Retainer clips manufactured from high quality, virtually unbreakable polypropylene secure the Shepherd Gull Wing or V-Bar Splash Fill
slats to Shepherd Fill Slat Hangers mesh. Shepherd Retainer Clips are available for 4" or 6" Gull Wing and 4" V-Bar.
Gull Wing Fill Slats
Gull Wing Fill, available in 4-inch or 6-inch widths, is our latest and most efficient fill slat offering. The unique design of the Gull Wing Fill
effectively addresses two key concepts clearly lacking in the majority of competitive fill slats: span and water bypass. Span is assured
with full bearing surface contact between the slat and hanger and a center rib stiffener for increased strength. A unique retainer notch
placed at regular intervals creates a space for the hanger grid while providing a full eighth-inch overhang per side to virtually eliminate water
bypass.
Thermally, the Gull Wing Fill is a superior offering when compared to other splash fill bars currently on the market. In fact, the author of the
MRL Rating Software, a rating program used by the majority of cooling tower companies, states, "Gull Wing Fill installations have never
rated short when using MRL original data and comparing the thermal projections to that of the actual field test results".
Gull Wing Fill, when used in conjunction with Shepherd Fill Slat Hangers, is offered with a 10-year warranty!
V-Bar Splash Fill Slats
Splash bars manufactured of extruded PVC with either carbon black or titanium dioxide as a UV inhibitor. The fill bar shall be 50 mil (+/-
0.005") thickness with a uniform hole punch pattern surface to aid in water break-up. Bars should be supported by wire mesh grids a
minimum of 24" on center along the bar length. Splash fill bar type must have at least five (5) years installation history. The fill material is
in accordance with CTI Bulletin STD-136 (88).
Plastic clips shall be interlocking to secure fill bars to mesh. Clips shall prevent any movement between the bar and the grid. The clips are
to be made of pliable polypropylene and shall not break when bent.
Hanger Grids & Brackets
Time tested Shepherd Fill Slat Hangers deliver longer tower life and virtually eliminate fill support failure. Shepherd Fill Slat Hangers are
precision welded wire with uniform grid size and superior corrosion resistance. Hangers are available in galvanized, PVC coated or
stainless steel mesh. Standard grids in a variety of gauges, straight or racked, are available and in stock. Custom grids may be made to
order. Shepherd's unique 3" steel spiral binders may be used to quick connect length drops. As with our hangers, binders are available
galvanized, PVC coated or stainless steel.
Hanger Brackets, manufactured from high quality, corrosion resistant polypropylene, support Shepherd Fill Slat Hangers making
installation faster, easier and more efficient.
Fill Slats & Retainer Clips
Shepherd produces a complete line of high quality extruded PVC cooling tower fill slats designed for parallel and perpendicular
installations. Rigid and strong, Shepherd Fill Slats are engineered for maximum efficiency with minimum power requirements. Shepherd
Splash Fill Slats are available two configurations, Gull-Wing (4" or 6" widths standard) or V-Bar standard 4" width standard).
Retainer clips manufactured from high quality, virtually unbreakable polypropylene secure the Shepherd Gull Wing or V-Bar Splash Fill
slats to Shepherd Fill Slat Hangers mesh. Shepherd Retainer Clips are available for 4" or 6" Gull Wing and 4" V-Bar.
Cellular Fill
CES-190& CES-120 Film Pack Fill
The most efficient heat transfer method for counterflow cooling towers is accomplished via cross corrugated film-type media or fill. This fill
is thermally formed from rigid polyCellular Fillsinyl chloride (PVC), which resists decay and fungal or biological attack. The C. E. Shepherd
Company currently offers two such media, CES-190 and CES-120 (see specifications below for details). CES sheets conform to the
commercial standard ASTM D1784:12454B. Our sheets can be shipped nested for your assembly or shipped assembled from any one of
our four assembly locations.
Assembled CES packs can be cut to fit snugly around framework while still maintaining its rigidity. A perpendicular stacking installation
provides break-up points for silt allowing continual flushing of contaminates. The individual stacks allow easy removal for cleaning or
replacement if required. CES Film Fill Packs significantly increases cooling tower efficiency as its expansive surface area accelerates
cooling in a thin film of water. This increased efficiency translates to reduced pump head and horsepower requirements.
VE-210 Film Pack Fill
Shepherd VE-210 film fill system delivers superior performance with reduced fouling. The vertical entrance / vertical exit media design
promotes free flow of debris and biological growth while the cross-corrugations maximize surface area and create turbulence to ensure
efficient heat transfer.
Packs are assembled from corrugated sheets bonded with an environmentally friendly adhesive at dedicated glue points. This bonding
method produces the strongest packs available, assuring both ease of handling through the rigorous installation process and effective
performance during operation.
The VE-210 is a low-fouling, thermally efficient, durable media perfect for heavy industrial applications including power plants, refineries,
petrochemical plants and pulp/paper production. Additionally, versatile VE-210 is appropriate in light to medium industries such as the
HVAC market. As with all Shepherd Cooling Tower Components, VE-210 is designed for retrofits and new construction alike; VE-210 can
boost performance in towers old and new, regardless of manufacturer.
CES-190& CES-120 Film Pack Fill
The most efficient heat transfer method for counterflow cooling towers is accomplished via cross corrugated film-type media or fill. This fill
is thermally formed from rigid polyCellular Fillsinyl chloride (PVC), which resists decay and fungal or biological attack. The C. E. Shepherd
Company currently offers two such media, CES-190 and CES-120 (see specifications below for details). CES sheets conform to the
commercial standard ASTM D1784:12454B. Our sheets can be shipped nested for your assembly or shipped assembled from any one of
our four assembly locations.
Assembled CES packs can be cut to fit snugly around framework while still maintaining its rigidity. A perpendicular stacking installation
provides break-up points for silt allowing continual flushing of contaminates. The individual stacks allow easy removal for cleaning or
replacement if required. CES Film Fill Packs significantly increases cooling tower efficiency as its expansive surface area accelerates
cooling in a thin film of water. This increased efficiency translates to reduced pump head and horsepower requirements.
VE-210 Film Pack Fill
Shepherd VE-210 film fill system delivers superior performance with reduced fouling. The vertical entrance / vertical exit media design
promotes free flow of debris and biological growth while the cross-corrugations maximize surface area and create turbulence to ensure
efficient heat transfer.
Packs are assembled from corrugated sheets bonded with an environmentally friendly adhesive at dedicated glue points. This bonding
method produces the strongest packs available, assuring both ease of handling through the rigorous installation process and effective
performance during operation.
The VE-210 is a low-fouling, thermally efficient, durable media perfect for heavy industrial applications including power plants, refineries,
petrochemical plants and pulp/paper production. Additionally, versatile VE-210 is appropriate in light to medium industries such as the
HVAC market. As with all Shepherd Cooling Tower Components, VE-210 is designed for retrofits and new construction alike; VE-210 can
boost performance in towers old and new, regardless of manufacturer.
| Headquarters: 1310 West Main Street La Porte, TX 77571 (office) 281-484-2665 (fax) 281-484-2371 |
| (C) 2010 Cooling Towers of Texas, All rights reserved. |
